Midnight, you are driving on the way back home, and you heard the boom. Easily you guess what happened? Your car tire is flat. It can happen any time anywhere while driving. How miserable a lovely enjoyable drive getting a painful journey for you if you don’t know how to use a car jack to change flat tire.
But for you, it’s very important to know the steps by step process on how to use a jack stands to install a new tire. It’s not so difficult. With the new invention of technology, we have got some tools like portable car jack, torque wrench, air ratchet and wheel wedges, that can help us safely to install a new tire. Just do it once, you will see how easy and fast.
How to Use a Car Jack to Change Flat Tire
To change your flat tire, you will need some tools and jack stands to raise up your vehicle. Most of the car comes along with the required tools and equipment. Don’t forget to have those with you in your vehicle at all times. In case of missing a tool to change a tire, it’s impossible only by using a car jack. You will have to get an assistance of the mechanics and it will cost you a large number of bucks, stay with us follow the provided guidelines you will be able to learn how to use a vehicle jack.
Tools that required to change a flat tire by using a car jack
Make sure you have all those necessary tools along with you.
- Spare tire
- Hydraulic Car Jack or any kind of jack stands that is comfortable for you.
- A Torque Wrench or an Air Ratchet- an important tool to tighten and loosen your wheel.
- Wheel Wedges- to prevent you from any kind of accident.
- Mechanical working gloves- to protect your hands from any kind of rare accident
- Road reflective flares- To get attention for the other’s driveway. Important prevention to minimize any road accident if you fix your vehicle flat tire on the road.
Step by step process to use a car jack to install a new tire:
● Find a secure place:
Please bear in mind that you should park your car in a secure and safe place during changing your vehicle's tire. Have a look on the ground floor if the place is soft. The floor jack can get into the floor if it’s not hard enough. In that case may your portable floor jack will not help you to lift your car. Use the hand brake or parking brake. If you are on the highway emergency parking area, be sure to wear a bright safety jacket to get attention from the others.
● Jack up the vehicle:
Once you have parked your car get a toolbox with your required tools that we mentioned before. Use the torque wrench to loosen the lug, but don’t take them off, it may harm you. Get your floor jack and turn it clockwise carefully and raise up the vehicle until you may feel comfortable to replace the tire. But not more than 5-6 inches above the ground floor. It may take you 3-5 minutes. Make sure you place the car jack in the right jacking point.
● Remove the flat tire:
Once the car is raised up by using a car jack, take off all the lug nuts and keep them in a secure place. Use both hands to pull the wheel out from the studs. Lay down the flat tire so that it will not roll away.
● Replace the new tire:
In this step, whenever a flat tire is removed from the studs, replace the new one just push softly the tire on to the studs. Get back all the lug nuts place them into the point. Tighten them first by hands.
● Lower the car:
In this step, you will lower the car by using a jack handle counterclockwise direction, until vehicle wheel softly touches the ground floor. Now tighten the lug again with the wrench. Finally, you are ready to fully lower the vehicle and tighten the lug nuts all the way. Remove the floor jack.
● Replace your tools and car jack
Place your equipment in their place and you are ready to go. Make sure after a wheal check back the wheel if it was tightened well.
Where to place the jack to raise the car?
It is one of the essential parts to use the vehicle jack. Make sure you know the exact place of jacking point to raise up the vehicle. If you lift your car somewhere else it may damage your car shock absorbers or body. Each vehicle has its jacking point well designed to prevent the damage vehicles. To find out the exact jacking place please have a look at the user manual. Usually each car has their jacking point just little behind the front wheel and slightly ahead of the rare wheel.
What type of car jacks do you use?
It depends on your car weight and size. If you are having a lifted truck you may take a bottle jack. Which one is lightweight or heavy weight? On the other hand, floor jacks are for more stability. To use car jacks, it depends also on the height of wheels. If you need to jack up more, bottle jack will not help you. Because of its limited jacking height.
Make sure before you jacking up the car to change your flat tire you are heaving enough space. Usually, the jack stand comes with the vehicle but it will take enough space if you are using a floor jack. I hope all the above instructions will help you to know how to use a car jack to change flat tire? Strongly recommended to Take care of safety precautions.