Do you know how to clean k&n cold air intake filter? Well, if you are also unaware of this process like many other people, do not worry. We are here to help you understand the process step-by-step.
All our vehicles have an air intake system. We install it in our cars and hope that it will work properly for the purpose they are made for. The main purpose behind their installation into the system is to improve the combustion. Along with this, it has a positive impact on the horsepower and the sound of the engine. But, similar to other parts in the vehicle, a clean air intake system also wears out with time. Therefore, it requires regular maintenance to keep it working for a long time. Mainly, it is receiving dust, and dirt from the atmosphere, and over time it starts to build-up in this system. This is why we need to clean it after every few months.
How to Clean K&N Cold Air Intake Filter?
As we know that when the air is sucked inside, it also brings dirt and grim with it. It is quite understandable that when this system will stop working properly due to this build-up, the engine will also lose its efficiency. Its horsepower will below, and the fuel efficiency will drop down as well. This is the time when you need to learn about how to clean cold air intake.
Signs That Indicate Cold Air Intake Filter Need Cleaning
There are few signs that you can observe to confirm that this problem is happening inside the vehicle. These include the following:
● Loss in the engine performance.
● Low horsepower values.
● A decrease in the efficiency of the engine system.
Any of the above symptoms is a confirmation that the best cold air intake is losing its ability to work. You should know that this is the time to change it before it starts to cause a problem for other parts of the engine.
Let us learn about the various important steps that you can follow to clean the cold air intake filters. These are simple steps, but you have to follow them in sequence and do as it is told. Any mistake can cause damage to the filter due to which you might need replacement. This will cost you much more money, time, and effort. Therefore, be careful about it.
Steps to Clean the Cold Air Intake
It does not matter if you need K&N air filter cleaner services or one from some other brand, the basic strategy for this task is the same. The steps that we are going to share below will be helpful for you even though your car step is different. Let us start with each step-in detail:
Step 1
The first step to learn how to clean the intake filter is to remove the hood and take out the air filter currently working in your engine system. If you do not know how it looks like, then just understand that it is at the top of the engine and looks like a square or round box. The shape may vary depending on the filter that is present inside. So, you have to spot such a box and take it out with great care.
Step 2
In the second step, all you need to use is the hose vacuum. This will be helpful in the removal of the superficial layer of dust and dirt stuck insider the cold air intake filter. The oil in air intake will require the use of a cleaning solution, so at this stage, we only deal with dry material. Do it quickly and move on to the next steps that are a little challenging.
Step 3
If you are learning about how to clean a K&N air filter or one from some other brand, know that it requires a cleanser. You have to spray it on the filter and leave it there for at least 10 minutes. You will find either an aerosol or a cleaning kit in the vehicle. This will contain the cleanser solution in an aerosol or squeezing the bottle.
Step 4
Use low-pressure water for the filter at this stage. It will help you remove all the cleansing solution stuck on the filter system. You can move it around, up and down, to make sure that the water rinses off all the solution and dirt from its surface. The cold air intake cleaner needs to be removed completely because any residues can stay and cause a problem for the filter later on.
Step 5
You may shake the filter to remove the excess water from the intake filter. Out it in the place where it can dry out with natural air. You have to wait until every drop of water is dry. Only after this stage, you will be able to apply the oil to it.
Step 6
At this stage, you may take out the filter oil from the cleaning kit of the vehicle. This filter oil is different from the cleanser that is also present within the same kit. To understand how to clean cold air intake, you need to also understand the difference between these two. When you get this oil out, spread it all over the filter. Take the wipes to remove extra oil on the surface. You may leave it for some time so that the oil may absorb into it.
Step7
The last step involves the installation of a cleaned cold air intake into its housing. All you need to do is to secure the locks and clamps so that it may remain in their position.
Conclusion
From all the steps given in the above sections, we come to know that cleaning a cold air intake filter is very simple. We are sure that you can learn how to clean k&n cold air intake filter with our step-by-step guidelines. If you do not clean the filter regularly, you have to bear the cold air filter buying cost.
It is generally assumed that the cleaning process of air intake filters is very complicated and only professional experts can do this job. However, looking at the above strategy, it seems to be an easy task. It is just a matter of understanding and correct guidance that can make this task easy for anyone.