How much is a Brake Fluid Flush? Step by Step Guide

Brakes are essential elements of your car’s safety. However, most people are not entirely familiar with its importance. The entire stopping mechanism of your vehicle depends upon this solution. It helps in magnifying your foot’s strain on the pedal.

This article contains a complete guide about brake fluid and how much is a brake fluid flush? Check the guide below for detailed insight.

What is Brake Fluid Flush?

While driving your car, if you hear some loud squeaks upon stopping your vehicle, your car's stopping pads need an inspection. But the signs that show it's time for a brake fluid flush are hard to spot. It is essential to take necessary measures from time to time for proper maintenance.

The car's brake oil absorbs moisture and gets dirty over time. This will reduce its efficiency and effectiveness. It is also known as brake fluid change. Moreover, keep in mind that this fluid is hygroscopic. This means it absorbs around three percent of its weight in water every year. Because of this, it’s necessary to change the liquid every two years for enhanced working.

How much is a Brake Fluid Flush?

The average brake fluid flush cost is around $69 and $110 for most available vehicles today. This pricing is for both labor and the new oil. Keep this noted that the brake fluid is highly affordable, and the flush procedure is usually the same for all the vehicles.

The polluted fluid will wear your vehicle’s brake pad out quicker than you imagine. Changing the liquid can ensure your car's safety and increase the lifespan of the calipers and drums.

While performing the job, do not forget to check the labor cost. The next thing is to ensure whether you are bleeding all the four corners of your vehicle or not. Finally, check the price of the braking solution which you are planning to use. Do not forget to compare the price with some other chemical flush you might use. Afterward, check the cost of the labor. Once everything comes under your budget, go for it and get it done.

Labor Cost

The cost of brake fluid flush depends upon different factors. It includes the new brake fluid you plan to use and a labor price. One can quickly get all the information related to some particular brake fluid on the web.

It is one of the most significant costs involved in this process. Whenever you check the brake fluid flush price online, you will see two things. These are fluid and labor costs. The quotes that are higher in price are dealer quotes. The dealership of luxury cars is a lot higher than others.

In some situations, the cost of changing the braking solution depends on different factors, i.e., geographic location. If you live in an area where the mechanics cost a lot more, you need to pay more. Usually, the normal range is from $15 to $210. Moreover, different brands, i.e., Valvoline, Firestone, and Mechanic charge a flat rate from their customers. One can get every detail on the web these days. Do not check to forget the price range before getting the job done.

How to do Brake Fluid Flush?

If you want long-term maintenance of your car, maintain everything. Try to perform this flushing old brake solution job every two years. This approach will improve the overall working mechanism of your brake system.

List of Items

Some of the critical items you need to perform brake fluid change include a brake bleeder wrench, car jack, container, brake cleaner, turkey baster, new solution, etc. It is vital to get all these materials to make the job done. One must clear the hose first to begin the process. Ensure you get everything mentioned above before starting the process.

Step by Step Guide

The steps that are involved in the process are as follows:

● First, use the spray brake to clear and clean the cylinder properly. Make sure you perform this step correctly, and there is no dirt left in the cylinder.

● Once you perform the first step, the next task is to flush out the old brake fluid entirely from your car with the help of a turkey baster.

● After this, fill the cylinder with fresh liquid. Make sure you get the right oil for your vehicle.

● The following job is to lift your vehicle slightly up so that the brake liquid can get easier access to your vehicle's braking system.

● Lose the bleeder valve slowly by using the bleeder wrench.

● After this, press your car’s brake pedal gradually until it is pressed down.

● While pressing the pedal, allow the old solution to drain completely from the brake arrangement of your vehicle into the container after you open the bleeder valve.

● After this, close the valve properly once everything is done.

● Repeat the steps until the old fluid is completely removed from your vehicle.

One can efficiently perform all these above steps on their own. But in case you face difficulty in managing things properly, consider taking professional help. Check fluid level after completion, low brake oil can damage your system.

Is a Brake Flush Necessary?

Like other cars' oil, it is an exceptional liquid that allows the slowing mechanism to work proficiently. One possible justification for this fluid crumbling in quality can be little pieces of the brake calipers and wheel cylinders floating off the car's brake fluid. One more explanation why brake liquid breaks down is that water can get within the reservoir, making rust structure on the inner parts of the stopping mechanism. All this will expedite.

Like car's engine oil starts to degrade in quality throughout every vehicle's natural life expectancy, so does brake fluid. The perfect, sound liquid turns discolored and indeed an inevitable risk to the car.

Common Symptoms

Here in this section, you will get to know about some of the common symptoms of this problem.

● The brake pedal of your vehicle feels soft.

● The stopping mechanism of your vehicle is not performing correctly.

● Your brake pedal goes all the way to your vehicle’s floor.

● You need to pump the brakes to manage things well.

If you face any of the above-listed symptoms, you need to change your vehicle’s existing stopping solution as soon as possible and replace it with a new one.

FAQ’s

Is a brake fluid flush necessary?

Well, the answer is yes. It is significant to remove an old oil from your vehicle from time to time and replace it with a new one. As we all know that brakes are an important component of a car. It ensures a person’s safety. Due to this reason, it is vital to check everything properly and take proper measures.

How often do you need a brake flush?

On average, one must flush the old liquid from their car and replace it with a new one every two years or once the 30,000 miles are completed. However, remember that the proper routine maintenance is equally significant for your driving patterns. If you drive shorter routes with repeated braking, you need to replace your car's brake solution quite often than usual.

What happens if you don't change your brake fluid?

If you don't change it, it can cause dirt and moisture contamination in your vehicle's brake reservoir. The brake reservoir is where your brake liquids stored.

Can I change brake fluid myself?

Yes, you can. One can easily flush the old one and replace it with a new one on their own. If you face a problem managing things well, consider taking professional help.

How long does a brake flush take?

The entire process of changing the liquid with a new one takes only a fraction of minute. One can efficiently execute this job within 15 to 30 minutes.

Conclusion

Flushing your car's old brake solution is not a difficult job to perform. It is easy to manage and is highly affordable. One can quickly perform this task on their own. It is essential to get all the desired items to execute the job well. This article contains a complete guide on changing your car's fluid and how much it costs. The price usually varies from vehicle to vehicle. It is crucial to get the right solution for your car. Check the article above for an in-depth guide regarding how much is a brake fluid flush.